Application
Light is more than light and dark.Good lighting draws in potential customers and guides them through a hotel lobby. Rayconn LED lighting can evoke warm emotions of comfort, safety, creativity and prosperity,enhance the ambiance, help differentiate service experiences, and bolster the bottom line.
When the color temperature scale of the light source is consistent, the light color of different types of light sources should be analyzed. Therefore, light sources should be selected in lighting design in a targeted way. Under the condition of the same color temperature, the trade-off between energy saving and maintenance in terms of light flux and average life expectancy and light color should be weighed comprehensively. Incandescent lamps should not be used because of "green lighting". When the color temperature scale of the light source is consistent, the light color of different types of light sources should be analyzed.
Use the matching relation of illuminance and color temperature to build appropriate spatial atmosphere meticulously. Generally speaking, color and illuminance should become the collocation of direct proportion, namely high illuminance, high color temperature, and vice versa. The color temperature of domestic hotel lighting design is usually very high, but the illumination is generally low, often fall into the "gloomy" atmosphere.
Where direct illumination can be used, indirect illumination shall not be used. Light trough has been widely used in all kinds of commercial space lighting, and even some flood. With the development of manufacturing technology of electric light source and lighting fixtures, direct lighting has been able to avoid the harm of uncomfortable glare on vision. Therefore, there is no need to use various types of luminescent channels, which are wasteful and difficult to maintain, unless required for decorative purposes.
Select the appropriate light distribution, according to the room to space ratio of different functional areas of the hotel, the light distribution curve of light intensity distribution, central light intensity and semi-light intensity and other light distribution parameters are screened, in order to avoid the loss of light transmission in two aspects.